This is the updated design for the $38 MCP. It's a million times better and comes with a back box and is specifically created with the 3d printer in mind. With mobiflights event assignment, each device is a couple of clicks to process!

5

These were kindly created by Ross. They allow you to cur the J rails correctly. He has provided these files as G-code for printing. 

  1

Designed to fit the 3d printed FMC from the shop. This can be used to support the device if it's not intended to be fitted into the console. 

  1

My design for the EROS oxygen panel fitted to the Boeing 737. High in detail and easy to print in 2 separate colours.

  1

After being sent close up photos of the vent, this is as close as it gets to the real thing. Approx 19hrs to print each side.

Fusion-Link: 

https://a360.co/3gnqF7i

​

Youtube Video:

https://youtu.be/BGeb5bUCHmA

5

If you do not fancy making these from MDF. Then why not try to 3d Print the window handle covers.

  1

This is my landing gear design, with operational lock override.

 2

This unit fits perfectly into the sidewall lower orifice and required a cheap dummy mic from eBay.

  1

These have been added by popular demand. Split into several parts for easy printing.

  1

These have been added by popular demand. Split into several parts for easy printing.

  1

This is an adaptation of the 737 set CB. It requires an extra section to be separately printed in white.

 1

I borrowed a real Grimes light from work and drew it up on fusion to create on the printer. Here is the design. It can be easily converted to actually work with a filament.

 2

My 3d printable design for the 737 air control panel on both the CPT & FO side. 

 6

Designed to fit into my sidewalls. These are split into two parts for less filament and quicker print speeds.

 2

My 3d printable design for the 737 knee panel lourve/blower assy. This is the non operational type. 

 3

These are the jump seat mounts at the rear of the cockpit. Great for adding those detail touches. LH & RH included,

 2

This is the printable version of my working Korry Indicator with working press button.

2

This is the printable version of my  Cpt 6 pack warning annunciator with working press button recall. This is based around the decal supplied by www.cockpitsimparts.co.uk.

2

This is an adaptation of the 737 CB is by Tomas Nechyba. It requires a Dual Filament printer.

 1

Created by me! Works on all size reels. Silky smooth operation. You will require QTY 2 6204 bearings and one M8 x 30mm bolt! The fusion design can be found here: https://a360.co/3fYZE9Y

 1

This includes all the STL files. The design can be downloaded here:

https://www.737diysim.com/product-page/737-landing-gear-panel

The Build guide can be found here:

https://www.737diysim.com/build-guides-1/landing-gear-panel

5

Designed for Tom Eddy. This uses the same tactile switches in the FMC and can be illuminated in two different colours. CAD here:

https://a360.co/3D1hUK2

  1

This is the MTU Base that ensures the throttle is held securely and mounts it at the correct height from the floor.

It also houses the majority of the electronics.

  1

Boeing 737 Map & chart Panels in STL format to 3D print or CNC. These panels include the special shaped knobs for these panels.

  1

Created to make the build easier! 

Fusion-Link: 

https://a360.co/3e4XIvx

  1

If your completely mad and want to print these, here's the link. I can only imagine how much PLA would need! But if you do, I want to see!

  1

These are designed to fit perfectly into my sidewall designs.

  1

you will need to print QTY 2 of each part for LHS & RHS.

  1

These have been added by popular demand. Split into several parts for easy printing.

  1

These have been added by popular demand. Split into several parts for easy printing.

​

  1

Especially designed to be quick and easy to print. You will need to apply your own decals. The unit has a 4mm hole in the back for an attachment screw.

  1

My design for a quick and easy printable 3d Map light for 737. All you requires is a  cheap 12v led Bulb from Ebay.

 2

My 3d printable design for the 737 knee panel lourve/blower assy. This is fully working and can be directed in any direction. 

 6

My 3d printable design for the 737 Window Handle and plate assy. I have included in the plate in the stl file even though it should be created from metal.

 2

These are the hat/clothes clips at the rear of the cockpit. Great for adding those detail touches.

 2

A dummy FDAS Module to add that little bit more realism.

 2

This is the printable version of my working fire warning annunciator with working press button.

2

This is the printable version of my  737 Dome Light. This is based around a 20W Phillips LED bulb i bought from the supermarket.

1

This is a simple 3d printed box that allows the fitment of the PCB prototyping board and allows the creation of breakout boxes and patch Panels.

 1

These button bases are designed to allow www.CockpitSimParts.co.uk laser engraved buttons to fit into your 3d printed FMC build. The CAD design can be found here: https://a360.co/3cJWwxx

​

  1

I designed this a long time ago to help organise and support all the LEDS for the Aft overhead LE Panel.

  1

Designed to fit a 76.2mm diameter pipe. The design can be found here:

https://a360.co/3yphv1Q

The STL's can be downloaded here:

​

  1

Created to make the build easier! Cut the hole and insert.

Fusion-Link: 

https://a360.co/2QsGGzu

  1

This awesome design is provided by:

Josh Katz

  1

If your completely mad and want to print these, here's the link. I can only imagine how much PLA would need! But if you do, I want to see!

  1

This replaces the ashtray on the real aircraft. 

  1

These have been added by popular demand. Split into several parts for easy printing.

  1

These have been added by popular demand. Split into several parts for easy printing.

  1

Printed in 3 parts. Add 2mm perpsex sheet if required

  1

This is the printable faceplate and backplate of the 737 DIY MCP. Split down to fit on the smaller 3d printers. Fusion design: https://a360.co/38CHkOe

5

My 3d printable design for the 737 Complete Circuit Breaker Unit. Designed from a real aircraft CB.

 2

My 3d printable design for the 737 Sidewall Vent. Colour can vary from cockpit. White/Beige to dark grey.

 2

My 3d printable design for the 737 Window Handle and plate assy. I have included in the plate in the stl file even though it should be created from metal.

 2

My 3d printable design for the 737 knee panel lourve/blower assy. This is the non operational type.

 3

If your completely mad and want to print these, here's the link. I can only imagine how much PLA would need! But if you do, I want to see!

  1

This is the printable version of my working Master Caution warning annunciator with working press button.

2

This is an adaptation of the 737 CB Maintenance Tag is by Tomas Nechyba. It requires a Dual Filament printer.

 1

Created by Daniel Hahn. This makes mounting all those Arduinos really easy!

 1