Collective Twist Grip
This page is split into three main sections:
Parts Guide
Print Guide
Build Guide
Our 3D Printer of choice right now is the CREALITY CR10 v3
It has excellent print & build quality for the price. It is Silent and has a larger print bed of 300 x300mm. Karl personally recommends it for his sim builds. It's currently the only printer that allows all his designs to be created on.
Karl's Second cheaper choice is the CREALITY ENDER 3 v2. Smaller printer bed of 220 x220mm. But performs excellently and has a purchase price of around $200. Please note, you are then limited to the smaller sim builds. Not all sim designs can be created with this printer.
General Information:
Parts Guide:
You are going to need the following items to complete this build:
Click Image for Link | Component | Description | Qty |
|---|
Print Guide
_PNG.png)
HS BASE 1
QTY:2
Material: PLA
ETC: 3 Hrs
Colour: 1Black
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
_PNG.png)
HS BASE 1 Copy Copy Copy Copy
QTY:1
Material: PLA
ETC: 5 Hrs
Colour: Dark grey
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
_PNG.png)
HS Cap 2
QTY:1
Material: PLA
ETC: 1 Hrs
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
_PNG.png)
Twist Base (6)
QTY:1
Material: PLA
ETC: 2 Hrs
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
_PNG.png)
Spur Gear 17T (3)
QTY:1
Material: PLA
ETC: 1 Hrs
Colour: Any
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
_PNG.png)
Twist Clamp (7)
QTY:1
Material: PLA
ETC: 1 Hrs
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
_PNG.png)
HS Clamp (4)
QTY:1
Material: PLA
ETC: 2 Hrs
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Build Guide
