AW139 Heli Collective Grip

AW1 Faceplate Embossed for 3D printing

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

NOTE: This text is small! I may not print. If you would like a laser-etched faceplate, please get in touch with me.

ETC: 9 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW4B SW CAP for 3d printing

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

NOTE: This text is small! I may not print. If you would like a laser-etched faceplate, please get in touch with me.

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW8 Coll Nav Top Hat

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW12 & AW13 Button

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW17 Collective Grip LH

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.12mm
ETC: 11 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW2 SW BP DBL

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm

ETC: 1 Hour

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW5 SW Cap 3d print

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

NOTE: This text is small! I may not print. If you would like a laser-etched faceplate, please get in touch with me.

ETC: 9 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW9 SW Cap

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.12mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW14 & AW17 Button BP

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW3 Faceplate base for laser insert

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 8 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW6 Collective box

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm

ETC: 11 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW10 RPM SW BP

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW15 Trigger

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

NOTE: This text is small! I may not print. If you would like a laser-etched faceplate, please get in touch with me.

ETC: 9 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW4A SW CAP for Laser insert

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW7 Top Hat

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW11 Brace

QTY:2
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm

ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

AW16 Collective Grip RH

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.12mm

ETC: 10 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Print Guide: