Downloads & Blueprints
Where can you get the LED switches for this panel.
these are the correct one at ALI ->https://nl.aliexpress.com/item/32762591668.html?spm=a2g0o.productlist.0.0.37202696heMaMn&algo_pvid=06105e06-162f-4518-9325-7ee74d9e5c1b&algo_exp_id=06105e06-162f-4518-9325-7ee74d9e5c1b-0&pdp_ext_f=%7B%22sku_id%22%3A%2262740930751%22%7D&pdp_pi=-1%3B23.03%3B-1%3BEUR+4.39%40salePrice%3BEUR%3Bsearch-mainSearch
I got my switches 6x6x7 swithces today but I realize i must print the bases again and try to get higher fidelity from the print otherwise the buttons will not fit.
I have printed 15 versions of the lower bases and cannot get the leds to "snap" in. The only way is to hollow out the middle and lock them in with letter cover and fmc cover. I would love to see a close up of the inside bases karl uses. To get the base to fit in the FMC the rectangle where the led is suppose to lock in is way too small. Broke 2 LEDS tring but math is math, it measures far too small to fit the led. Did you get it to work?
oh ya, im using AV_72A LETTER BASE
Be careful, switches with triangular shaped tabs run 5.7mm, which will result in a poor fit to the caps. Try to get square tabbed ones.
Here is the only link I could find, they are hard to get seemingly.
@Mike Delaney the company that ships to the UK also ships to the US. Just look on ebay.com. Thats where I got mine
That doesn't ship to the US, anyone got a second source, or the part number?
Got them ordered. Thanks!
t is on this list: https://www.737diysim.com/build-guides-1/boeing-737---3d-printed-fmc
Thank You for helping!
@Karl Clarke No problem!
I second this question, can we get an exact model so we don't end up buying 100 of the wrong sort ;P