some step issues:
S5.5 - adding the PVC pipe and the number and type of screws
S14 - "to" probably needs to be "two"?
S29 - no text, probably need number and type of screws?
S34.5 - missing step for part 23 and the bearing and screw that go in it
S38 - missing screw and type of for part 22
S43 - missing the word "shaft" after the "mm"?
S47 and S48 - missing the screws to fit the shaft to the centering assy
some BOM issues:
bearing type 6203 appear only 2 in the instructions, but 6 in the BOM
bearing type 6204 appears 4 times in the instructions but 6 in the BOM
there are 8 gears in the BOM but only 4 in the instructions
regarding screws in the BOM, from what I counted in the instructions (minus all the missing above):
Dome head -
M4 8mm (QTY 4)
M4 30mm (QTY 6)
Counter sunk
M4 18mm (QTY 8)
M4 20mm (QTY 3)
M4 30mm (QTY 2)
Socket head -
M4 308mm (QTY 2)
grub screws -
M4 10mm - (QTY 1) or more if it's the plastic gears I imagine?
M4 washers (QTY 4)
that's it for now I think?
also all the screw types are missing in the steps, so all my counting is from pictures
that's it for now I think?
also, all the screw types are missing in the steps, so all my counting is from pictures
A big Thank you from me, Thats really helped keep the website sorted and tidy.
Kind regards Karl
Socket head -
M4 308mm (QTY 2)
Having checked, these are for the Stop Mod and Qty 4 are used. 2 at each end
some BOM issues:
bearing type 6203 appear only 2 in the instructions, but 6 in the BOM
bearing type 6204 appears 4 times in the instructions but 6 in the BOM
there are 8 gears in the BOM but only 4 in the instructions
Values changed, I added the parts for the dual control heads too as this was an upgrade at the time. Corrected and Thank you
S47 and S48 - missing the screws to fit the shaft to the centering assy
Screws added, Thank you
S43 - missing the word "shaft" after the "mm"?
Corrected, thank you
S38 - missing screw and type of for part 22
corrected, thank you
S34.5 - missing step for part 23 and the bearing and screw that go in it
Could you explain a little more on this one? I see the bearing and screw listed in step 35.
S29 - no text, probably need number and type of screws?
Added, thank you
S14 - "to" probably needs to be "two"?
Haha, yep defo, corrected
S5.5 - adding the PVC pipe and the number and type of screws
Added link to the frame build, Thank you
and, can't these : https://www.ebay.co.uk/itm/KP-Series-Pillow-Block-Mounted-Housing-Bearing-8-10-12-15-17-20-mm-Bore-Diameter/283226070554?hash=item41f196de1a:g:A4kAAOSwmcFb0FMU&campid=5338603005&toolid=10001&customid=&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&ufes_redirect=true
be used instead of the 6204 and printed housing?
also, it's a bit confusing that this : https://www.737diysim.com/dual-737-control-frame-build-guide
is not part of the roll channel instructions, and is completely out of the build guide list for some reason?
one more - in S42 you add springs, but in the BOM there are no reference to them - QTY, length, diameter?
Oh, and non of the M8 washers are used in the instructions, but they are in the BOM