Hi, I’m building the NXI version and I have an issue with the loose button caps - I printed all caps on my resin printer (Anycubic Photon M3) and ordered 6x6x7mm tactile buttons (from AliExpress). Yesterday, the switches finally arrived, but unfortunately, it is not possible to mount them into the printed buttons caps - the caps are very loose and switches don’t click into the caps. As you can see in the attached images, the dimensions of the caps are a bit bigger than the dimensions of the switches. I'm not sure, if the issue is caused by a different type of tactile switches (as described here https://www.737diysim.com/forum/g1000/g1000-buttons) or because I printed the button caps on a resin printer and your STLs are somehow optimized for FDM printing, as the listing (https://www.737diysim.com/product-page/garmin-g1000-g1000-nxi) still says that “The resin print version will follow shortly (they are not compatible!)” - what do you mean by that? Will there be a different version for resin printers - if yes when I can expect it? The archive I’ve bought and downloaded contains only a single version of STLs, so I’m a bit confused.
BTW - there is also a mistake in the BOM (https://www.737diysim.com/build-guides-1/garmin-g1000-%26-g1000-nxi) - it says that the NXI version requires 30 tactile switchers (”6mm x6mm x7mm G1000 STD - QTY 20 White or Green G1000 NXI - QTY 30 White or Green”), but the reality is that the NXI version actually requires 32 pieces (12 more than a standard version)… Unfortunately, I ordered only 30 switches (they are sold in packages by 10) and realized such an issue just today :/ So, I need to order another 10 pieces and now I need to wait for a couple of weeks to arrive. ☹️It would be great to fix that mistake in the BOM.
