I have a lot of fun so far building the motorized TQ737v5. I've been looking for this for a while. I've been working on it for a few weeks now and I'm well on my way if I do say so myself. I still need to receive several parts such as 2x the hall sensors for the throttle handle. 2x nemo17 low, power supply, 6 stepper drivers etc. I replace the other 2 hall sensors with Potentiometers. I don't know anything about Arduino mega and mobiflight myself, but from what I understand there will be more explanation about this in the future. below are a few pictures of my progress and of my homecockpit here in the Netherlands.

Flaps guide made of 4mm aluminium with homemade CNC

Parking Brake made of 3mm aluminium

Parking Brake set, think I engraving the letters later on

Over 175hour off printing parts, and many hours to go😀

Speed Brake printed part handle i re-designed in fusion360 and the rest i made off aluminium 3mm, can not find the engraved knob.

Prepar3d, Prosim, 3x 1080 beamers around view 220degrees. Started 7 years ago after seeing the build videos of Kjetil from Norway, then I came across you on the internet and now I'm upgrading the SIM with a design by your Karl. To close in your words Sim Out😉
Hello Jeroen,
Thank you for the photos and your build is looking awesome! Your metal work is amazing and that brake lever looks perfect! It really does take a while to print, but i have lerant over the years just to leave the printers alone until its done. Please post more, good or bad as you go along. Kind Regards Karl.