Hello, can anyone suggest the correct 'Marker to use on the lines?
After 16hrs of printing the Front Facia, i would like to have a professional look in white but unsure whether to use a water base or an oil base type pen. Any help would be appreciated.

Hi Max,
Here's the link to 'Thiniverse' where i got it from.
https://www.thingiverse.com/thing:4878470
if you need any info regarding the 'Arduino' setup files, please feel free to ask.
The displays were sourced from ebay and the driver boards were from amazon.
[It's quite compact inside when wiring up all the parts, but it's worth it. Paused the top layer in Cura to change the filament to white.
Hope this hepls..
Hi Mike,
I use these:
https://www.amazon.co.uk/edding-5300-Acrylic-Marker-fine/dp/B08HS4N7SM/ref=sr_1_6?crid=H6UYW3FEVBW8&keywords=white+eddy+paint+pen&qid=1680865904&sprefix=white+eddy+paint+pen%2Caps%2C76&sr=8-6
Easy to apply and for a really good finish apply two coats after the first has dried for at least an hour.
Kind Regards, Karl