I finally had success printing the Audio Buttons on my Ender 3 Pro printer. I installed the 0.2mm nozzle and changed a couple of settings in Cura. First I turned on "Print Thin Walls" in the Walls Section. Second in Inclusive in the Experimental Section. They printed fine with all raised text looking great except the buttons are too large to fit into the audio panel holes. The G1000 NXI buttons were too large to fit the panel holes if I sprayed 3 coats of paint on them. So I reduced the X and Y dimensions by 0.3mm of each individual button in Cura and now the fit perfect when painted. I want to reduce the size of the Audio buttons but I cannot select each one individually. I can only select them all as a single unit. Is there a way to be able to select each button by itself in Cura as I don't own Fusion. Also I would like to print the buttons 10 at a time as one button always prints very distorted and I would like to re-print it by itself instead of re-printing all of them.