I have most of V3 printed. Looking at the parts list and build guide, the photos in the build guide do not appear to match the parts list in some cases. An example: 6mm threaded rod in the parts list, 8mm threaded rod in the build photos. I am not sure what screws to order. Suggestions?
top of page
bottom of page
I forgot to thank you Karl. I had been struggling with finding all the metric screws needed.
dougch, did you print the small or large version and will the large fit on a 255 x 250 bed, thanks
Good Morning,
Sorry about the delay, I am on my type course which is proving to be a lot more intentise than i realised. I would suggest using 6mm threaded rod. It did mention 8mm rod, but 6mm rod should fit through the holes a lot easier. I would also have a 6.3 or 6.4mm drill bit handy to ensure all the holes are clear and for ease of insertion.
I have removed the size from the pitures and added text to the description instead.
Kind Regards Karl