To see this working, head to your live site.

Zibo EFB Speed Brake Assignment

Hello All,

Is there anyone using their 737 throttle with the Zibo mod and is able to assign the flaps or speed brake axes? I have been unsuccessful in doing so both with the arduino and Leo Bodnar cards. If you have figured how to do this I would be grateful for any help in doing so myself. The axes are recognized in XPlane but not in the Zibo EFB.

2 answers3 replies

5 Comments

mikeyboy4255

Nov 24, 2021

Tbh I have‘nt looked or tried, all I know is it works in operation when flying the Zibo 3.51 and previous versions. i calibrate in the controls and thats it..

am I missing something that you are trying to do other than just general use.. sorry for my ignorance, new to flying.

Kevin Glave

Nov 24, 2021

Replying to

@mikeyboy4255 because my speed brake is somewhat noisy (maybe a bad pot) I was trying to use the option in the avitab (EFB) to assign the axis so you can define the positions (down,arm,flight detention) for the aircraft. The Zibo has this feature in the avitab.

mikeyboy4255

Nov 24, 2021

Replying to

@Kevin Glave oh ok, must give that a try myself. I had issues with noise on the throttles and changed them from the standard pots to Linear ones which I purchased from Farnells here in the UK. They are more consistent and get little to no noise although think that the grounding causes most noise issues. Have you tried separating the grounds from the 5v..

mikeyboy4255

Nov 24, 2021

Hi Kevin, I have made 2 TQs and both are fine with speed brake and Flaps using an Arduino Leonardo..

Kevin Glave

Nov 24, 2021

Replying to

@mikeyboy4255 are you able to assign them using the EFB in the Zibo Mod?

Zibo EFB Speed Brake Assignment

+447818295430