Hey again
if I may offer an improvement to the downloaded files:
if possible, can you change the part orientation so when dragged to the cutting software,
it would be in the correct orientation?
some of the part, especially in the yoke files are oriented very strange when dragged, and it takes a long tie to orient them correctly for the print, and even more - you probably have figured out the best orientation so we won't have to guess which one it is.
I imagine it takes a lot of time, so no hurries, and if you do decide to do it, I would start with the yoke files since they are the biggest problem.
but if you do, do put it in the end of the list since other stuff is more important.
for the beginner 3d printer, where is that button, didn't know there is one.
Hello, This is just not possible due to the shear size of the task right now. The parts come as they are drawn in Fusion. This is why I show a pciture of the orientation in the print guide. A single button press will orientate the parts as required in Cura, But changing the direction of the stl would be horrendus in fusion for every single part.
Kind regards Karl