Hi Karl.... I have a problem with motorizing a TQ throttle 1 and 2 + spoiler.
can you help me... do you have a guide for this?
I premise that I use P3d v5 hf2 with prosim and of course the 737 aircraft of prosim version 1.56 as well as the latest registered version of FSUIPC
I am powering a TQ with a MEGA 2065 and Mobiflight software....
I don't know if prosim has anything to do with it but talking to Dowson, he told me to try here.
on prosim configuration i set the SPD BRK normally while on mobiglight i set the offsets according to the FSUIPC table for p3d.
these are the OffSet settings:
Accelerator 1 0x088C -4096 to +16384
Throttle 2 0x0924 -4096 to +16384
Spoiler arm 0x0BCC 4 (0 = off, 1 = arm for automatic distribution)
Spoiler control 0x0BD0, 0 off, arm 4800, then 5620 (7%) to 16383
(100% fully distributed).
The value 4800 is set by insertion. Values from 0 to somewhere
close to, but below, 4800 do nothing. The percentage extent
is the proportion of the distance between 4800 and 16383, equal to
Although values from 4800 to 5619 cannot be used, 7% seems to be the minimum.
minimum.
unfortunately it does not work ... the spoiler lever does not move when I touch the ground ... and when I accelerate it does not go back ... same thing for the throttles when it sets TOGA not advance, while on the
the aircraft everything works regularly both spolir and throttle .. is it just a problem of movement of the levers....where am I wrong?
Greetings
max