Downloads & Blueprints
at 53, the length of 438 is missing
at 70, also the length is missing
Good morning Guys,
I really do not like to specify the lengths. If someone cuts them short because there build is slightly different, you have wasted a considerable amount of rod. In both examples you have stated, its much easier to place a length of rod into position and cut it to the required length to suit your needs.
Kind Regards, Karl
Hi Ido. it looks like 60mm for #53, unless i misread the question
that's another issue - it needs to say the nut should be 60mm from the end - I was talking about the length of the rod needed...