New Designs

Hello and good evening from Brunei!


I have spent the last week putting together new files for download based on your requests. The first new design available is the Boeing 737 Dual control Yoke roll channel, with metal gears and mechanically adjustable for different diameter pipes and includes the modification to stop the yokes from turning past 90 degrees. This is the version shown in the later Youtube video of the build.

This design can be found here:

https://www.737diysim.com/product-page/boeing-737-3d-printed-full-roll-channel-cad-design


The next design was for the complete Dual Yoke Assembly. This is a compendium of all my various designs for the Boeing 737 dual yoke assembly that I have created in the last 6 months in one file. This is to simplify the download process with one file needed to create the complete unit. After several months of prototyping carried out by Patreons and customers, all the individual parts have now been thoroughly tested and modified to produce the latest revision of the design.


Boeing 737 Dual Control Yoke Assy
Boeing 737 Dual Control Yoke Assy

I have added the dedicated 75mm PVC pipe Yoke head files to this design. This file also includes both versions of the roll channel; Plastic and Metal files. You only need to print the files from one folder. The design can be found here:


https://www.737diysim.com/product-page/complete-boeing-737-dual-control-yoke-assembly-files


Boeing 737 EFIS - 3d Printed
Boeing 737 EFIS - 3d Printed

And the last design added is the component that caused me so many headaches for such a small unit. The idea of printing a fully operational Boeing 737 EFIS has been playing on my mind for months. This is actually version 4. Version 3 you will never see as I wasn't happy with the operation and only came to this conclusion as I was filming the build. This version is even simpler and easier to create. The only downside at the moment is the lack of PCB's. But as you will see in an upcoming video, I manage to wire this easily. The whole unit is 3d printed apart from a few components and hardware. All the push buttons on the knobs operate correctly and the lower pushbuttons for the CTR & TFC will remain in the correct position as the knob is rotated around them. The buttons and the faceplate come in three versions: 1) Embossed/Raised text for easy painting 2) Embossed/Raised text for Pause printing or filament change 3) Engraved for Backlighting which also requires filament change/pause printing. The face panel and buttons are interchangeable from the www.cockpitsimparts.co.uk laser engraved panels available from them for that truly professional finish. This gives the home builder plenty of choice in the route they wish to take. Printing the base of the faceplate and buttons in white Pla at 20% with a 0.2mm nozzle then switching to black or grey PLA for the final layers allows full backlighting of the 3d printed panel. The buttons have also been modified from 3 or 4 letters down to 2. These allow for perfect text printing for backlighting. But come at the cost of moving away from the general aesthetics of the real aircraft. However, there are two other sets included for your choice. The end results are pretty impressive for a fully 3d printed panel. Have a go and let us know what you think.


The design can be found here:

https://www.737diysim.com/product-page/boeing-737-efis-3d-printed-design The Build/Parts Guide can be found here: https://www.737diysim.com/build-guides-1 The build guide is being updated as we speak! Enjoy Guys, & Kind regards from 737DIYSIM

650 views2 comments

Recent Posts

See All

+673 7207616

Patreon:        737DIYSIM

YouTube:      Heli Mech

Facebook:    Boeing738v2

Instagram:    737DIYSIM

Twitter:         737DIYSIM

Watsapp:     +673 7207616

Email: HelenWatersClarke@Hotmail.com

Postal Address:

Karl & Helen Clarke

7 FLT AAC,

Medicina Lines

London

UK

BFPO 11

Fancy helping the website

or buying us a thank you beer?