This purchase is for both the SINGLE & DUAL 737 Yoke Control Heads.


This option also includes design adjustments in the following areas to suit your parts:


  • The lower Output shaft
  • The adapter shafts to suit your bevel gears
  • The PVC pipe diameter


It is designed to act as a 90degree gearbox at 1:1 ratio. The gears in the design are 3d printed and work fine when printed at 100% infill in either PLA or ABS. If you prefer metal gears the links are provided, but the design will need adjusting. The control head is designed to fit into a 80mm OD PVC pipe. The internal shaft adapter is 19.2mm. Both these parts will require adjusting if you find different components of different sizes.


These units fit on a standard print bed of 220 x 220mm.


This unit can be completely 3d printed (less hardware) or you can use metal gears if they are available to you..


The dual design is fully working which is why I am releasing this part before the whole system is operational. If you would like to help or get started printing the head, this is where you can find the Fusion design and dedicated STL files.


The single design is still in Prototyping as my printers can not keep up, but this purchase will also allow any adjustments that you personally require.


The Build and parts guide can be found here:


Once the rest of the design is completed, I will deduct this from the final cost, and discount the final finished design if you wish to get started now. 



737 Dual & Single Yoke Control Head With Design Changes


    +673 7207616

    Patreon:        737DIYSIM

    YouTube:      Heli Mech

    Facebook:    Boeing738v2

    Instagram:    737DIYSIM

    Twitter:         737DIYSIM

    Watsapp:     +673 7207616


    Postal Address:

    Karl & Helen Clarke

    7 FLT AAC,

    Medicina Lines



    BFPO 11

    Fancy helping the website

    or buying us a thank you beer?