Design available to download on Cults3d -Click Here
Overview
The Budget 737SS Screen Frame pack provides the essential 3D‑printable parts only—perfect for builders who want the clean, recessed 737SS monitor bezel without needing CAD files or customisable options.
This cost‑effective edition is ideal if you're happy with the standard 737SS layout and simply want a high‑quality printable frame that hides the MIP backboard and enhances immersion.
What’s Included
3MF / STL printable files
Full‑Size version (300×300 mm bed required)
SPM – Small Printer Mod versions for compact printers
Brass insert mounting cavities on the rear face
Resin‑printable knob model for a premium finish
Not included:
No CAD files
No parametric depth adjustment
No STEP archives
This package is intentionally streamlined to keep costs low.
Key Features
Recessed bezel design
These frames use a deep recessed profile to sit flush with your monitor, hiding the MIP backboard completely for a unified visual finish.
Small‑printer friendly
The included SPM version splits the parts for small printers. Simply print, align, and glue using CA glue, 3D Gloop, or similar.
Brass insert mount system
The rear faces include housings for heat‑set brass inserts, allowing the frames to:
Screw into the MIP backboard
Remain fully removable for service or upgrades
Resin‑compatible knob
The knob can be resin‑printed for superb surface quality and crisp detailing.
IMPORTANT – SIZE WARNING
⚠️ This version will not fit standard 737 MIPs. Because the 737SS is a single‑seat design, the MIP uses one large monitor, and the screen frames were enlarged to match it.
These frames are not standard size and are only compatible with the 737SS (Single Seat) dimensions.
Print Recommendations
Layer height: 0.12 mm or finer
Orientation: Print face‑up for best surface quality
Supports: Required (due to recessed geometry)
Finishing: Wet sand → high‑build primer → sand → paint
SPM assembly: Glue pieces together; lightly sand joints if needed
Build Guide
For print orientation, finishing techniques, and SPM assembly steps, use the official guide: 👉 https://www.737diysim.com/build-guides-1/737ss-mip-screen-frames
Limitations
No depth adjustment (non‑CAD version)
Fit is fixed to the 737SS enlarged MIP format
Users with custom backboard thicknesses should purchase the full CAD edition
