Boeing 737 Yoke Check List
This page is split into three main sections:
Parts Guide
Print Guide
Build Guide
The ultimate printer I can recommend is the Bambu Labs X1 carbon with AMS or P1P if you have deep pockets. ($1200). It's a massive leap forward in 3D printing, with excellent quality and impressive speeds. It's pretty much press print and go as the software and hardware do the calibration before each print.
General Information:
Build Guide
Click on image for more details
STEP:
1
Place the mount (4) onto the checklist plate. Secure with Qty 2, M4 x 6mm countersunk screws.
Click on image for more details
STEP:
2
Place the decal onto the Check List Plate
Click on image for more details
STEP:
3
Insert the 2 springs in the clip, and secure with Qty 2, M3 x 20mm screws.
Click on image for more details
STEP:
4
Secure the clip to the checklist plate with Qty 2 , M4 x 20mm Screws.
Click on image for more details
STEP:
5
Secure the two ends of the springs with a 4mm x 60mm brass rod or similar.
Click on image for more details
STEP:
6
Insert the Brace into the Checklist plate and secure with Qty2, M4 x 20mm screws.
Click on image for more details
STEP:
7
Secure the check list to the yoke top plate with Qty 2, M4 x 20mm screws.
Click on image for more details
STEP:
8
Slide the yellow marker onto the side rail of the check list from the top.