![](https://static.wixstatic.com/media/031b6b_84bf94e83743466888a03764c399f65e~mv2.jpg/v1/fill/w_288,h_191,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/031b6b_84bf94e83743466888a03764c399f65e~mv2.jpg)
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_a1f1a06d612041b588773938316e6291~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
A1 Button Cases Copy
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.12mm
RECOMMENDED NOZZLE: 0.2mm, 0.12mm Layer height
ETC: 1 Hour
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_92e01e862742433c83ee172b3ba37c80~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
K1 to K4 Knobs
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
NOTE: If you struggle to remove the internal support, this can be switched off to none.
Adhesion: Skirt/ Raft will also help to create a stable peelable base
Nozzle: 0.4mm, Layer height: 0.12mm
ETC: 4 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_866a597a811d488fb9c7afd1909705d4~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
S1 & S2 Screen Mounts
QTY:1
Material: PLA
Colour: Any
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.2 mm
NOTE: This text is small! I may not print.
ETC: 2 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_a1f1a06d612041b588773938316e6291~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
A1 Button Cases
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.12mm
RECOMMENDED NOZZLE: 0.2mm, 0.12mm Layer height
ETC: 1 Hour
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_78b5ad8d1c1942098dc9d0d18daa9a86~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
L1 LHS Frame & R1 RHS Frame
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
Recommended: 0.12mm layer height for a highly detailed finish, but the print time is double. I suggest printing the first one at 0.2mm layer height and reprinting at 0.12mm layer height if all components fit.
ETC: 9 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_69d459c3790449388329ac9264787465~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
S3 Cross beam
QTY:1
Material: PLA
Colour: ANY
Infill:20%
Support: ON - Touching Build Plate
I then switched to Support off, which worked just as well, without removing all the support. It's just a little furry underneath.
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.12mm
ETC: 7 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_4296145890aa4580aeb9f02fc33dfdee~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
A2 & D1-D19 Button Labels
QTY:1
Material: PLA
Colour: White or clear
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
RECOMMENDED NOZZLE: 0.2mm, 0.12mm Layer height
NOTE: This text is small! I may not print.
ETC: 19 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_86a50fbec09e40eabe2fd332c371fe3b~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
L2 LHS Faceplate & R2 RHS Faceplate
QTY:1
Material: PLA
Colour: White or Clear
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.12mm
NOTE: This text is small! I may not print.
ETC: 9 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_840767c5ce9245ec844c9de8ae25b4d5~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
S4 mega Mount
QTY:1
Material: PLA
Colour: ANY
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.2mm
ETC: 2 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_94934458173e4180b35c9df912815dbd~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
B1 Bottom Frame & T1 Top Frame
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.12mm
ETC: 6 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
![RH Yoke Head Body (1).PNG](https://static.wixstatic.com/media/031b6b_5d1cb263fe3f4d82b4c032403b1b0460~mv2.png/v1/fill/w_230,h_150,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/RH%20Yoke%20Head%20Body%20(1)_PNG.png)
L3, R3, R4 Backplates
QTY:1
Material: PLA
Colour: ANY
Infill:20%
Support: OFF
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.2mm
ETC: 1 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active