Boeing 737 - 3D Printed FMC

Print Guide:

Boeing 737 - 3D Printed FMC

3A, 3B1 & 3B2 Backplate

QTY:1
Material: PLA
ETC: 14 hrs

Colour: Dark Grey
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

41A Action Button Base

QTY:15
Material: PLA
ETC: 0.1 hrs

Colour: Black
Infill:25%
Support: On
Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

1A, 1B1 & 1B2 FACEPLATE

QTY:1
Material: PLA
ETC: 17 hrs

Colour: Dark Grey
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

72A Letter Base

QTY:30
Material: PLA
ETC: 0.1 hrs

Colour: Black
Infill:25%
Support: On
Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

5/6/7 Top annunciator

QTY:1
Material: PLA
ETC: 0.1 hrs

Colour: Clear/Transparent Green
Infill:25%

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

4A Knob

QTY:1
Material: PLA
ETC: 0.2 hrs

Colour: Black
Infill:25%
Support: OFF

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

41B Action Base

QTY:1
Material: PLA

Colour: Black

5B, 6B & 7B Annunciator

QTY:1
Material: PLA

Colour: Clear/Transparent

10 to 39 Letter Buttons

QTY:01 EACH (30 in total)
Material: PLA
ETC: 1 hrs

Colour: White
Infill:25%
Support: On
Nozzle: 0.4mm (0.2mm Recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

60 to 71 Number Buttons

QTY:01 EACH (12 in total)
Material: PLA
ETC: 1 hrs

Colour: White
Infill:25%
Support: On
Nozzle: 0.4mm (0.2mm Recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

42 to 57 Action Buttons

QTY:01 EACH (15 in total)
Material: PLA
ETC: 1 hrs

Colour: White
Infill:25%
Support: On
Nozzle: 0.4mm (0.2mm Recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

2 Handle

QTY:1
Material: PLA
ETC: 1 hrs

Colour: Dark Grey
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

9A Black Upper Action Button

QTY:12
Material: PLA
ETC: 0.1 hrs

Colour: Black
Infill:25%

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C2 Case Backboard

4b Knob

QTY:1
Material: PLA

Colour: Black

8A Lower Base Action Button

QTY:12
Material: PLA
ETC: 0.1 hrs

Colour: White
Infill:25%
Support: Off
Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C1 Case

42-57C & D Action Button Resin

QTY:1
Material: PLA

Colour: Black

80 Arduino Mount

QTY:01
Material: PLA
ETC: 4 hrs

Colour: Any
Infill:25%
Support: On
Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Print Guide: