QTY:1
Material: PLA
Colour: White or Grey
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Raft (helps remove the support material
Nozzle: 0.4mm, Layer height: 0.2mm ETC: 14 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

QTY: 2 Red & 2 White
Material: PLA
Colour: White & Red
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Raft (helps reduce the elephant's foot)
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

QTY:1
Material: PLA
Colour: White or Grey
Infill:20%
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 10 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

QTY:2
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Raft (helps remove the support material
Nozzle: 0.4mm, Layer height: 0.12mm ETC: 6 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

QTY:2
Material: PLA
Colour: Black
Infill:20%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active