top of page

737 3D Printed Seat - Fixed Base

This page is split into three main sections:

​

Parts Guide

Print Guide

Build Guide

​

​

​

The ultimate printer I can recommend is the Bambu Labs X1 carbon with AMS or P1P if you have deep pockets. ($1200). It's a massive leap forward in 3D printing, with excellent quality and impressive speeds. It's pretty much press print and go as the software and hardware do the calibration before each print. 

​

pilot sign get here.png
737 SINGLE YOKE HEAD.jpg

Prototype 3D-Printed Seat | Experimental Release

This release gives Patreon members access to the prototype 3D-printable seat design.

The purpose of this prototype is to let builders explore the design, print and inspect the individual components, understand how the mechanism works, and use the parts as references for creating their own improved version.

This is not a tested or certified seat, and the 3D-printed prototype should not be considered a finished load-bearing product.

The final design concept is intended to be manufactured primarily from aluminium and/or steel, with the printed prototype being used to develop and prove the geometry before committing to metal manufacture.

⚠️ IMPORTANT SAFETY WARNING

PLEASE READ BEFORE DOWNLOADING, PRINTING OR ASSEMBLING THIS DESIGN

This is an experimental, untested prototype.

The design has not been structurally tested, load tested, fatigue tested or certified for supporting a person. 3D-printed components can fail suddenly due to layer separation, material defects, printing parameters, orientation, temperature, fatigue, fastener loads or other factors.

A failure of any component while the seat is occupied or being adjusted could cause the mechanism to collapse, move unexpectedly or trap fingers, hands, feet, legs or other parts of the body between moving components, potentially resulting in serious bodily injury.

For that reason, we do not recommend relying on 3D-printed components as structural or safety-critical parts of an occupied seat.

If you choose to manufacture, assemble, test or use this prototype, you do so entirely at your own risk. You are responsible for assessing the suitability and strength of the materials, print settings, hardware, assembly methods and any modifications you make.

The files are provided as a prototype design concept for experimental and development purposes, not as a certified seat or assurance of structural safety.

Printing the Prototype

If you decide to print the prototype, we strongly recommend:

Using the strongest suitable engineering material available to you. ABS/NYLON is the preferred choice.
Using print orientation that maximises strength in the expected direction of loading.
Using appropriate wall thickness, infill and reinforcement rather than treating normal decorative print settings as adequate.
Inspecting every component carefully for cracking, layer separation, deformation or other defects.
Keeping fingers and other body parts clear of hinges, sliders, linkages and other potential pinch or crush points.
Never assuming a successful static test means a printed component is safe for repeated or dynamic loading.
Replacing structural printed components with appropriately engineered aluminium or steel components if developing the project into a functional seat.
Intended Final Construction

The long-term intention for this project is not to rely upon the prototype printed parts for the final structural seat.

Once you are happy with the geometry and operation of your own build, structural components should be recreated in suitably specified aluminium or steel, with appropriate fasteners, bearings, pivots and reinforcement for their intended loads.

Simply reproducing a printed component in metal does not automatically make the finished assembly safe. Material thicknesses, fasteners, joints, welds, pivots, fatigue loading and the overall structure still need to be appropriately designed and assessed.

Builder Responsibility

By downloading and building this prototype, you acknowledge that you are working with an experimental DIY design and accept responsibility for determining whether your own construction is suitable for its intended use.

737DIYSIM cannot guarantee the strength, reliability or safety of parts manufactured by individual builders, because we have no control over the materials, manufacturing process, print quality, assembly, modifications or subsequent use of those parts.

Please treat this release for what it is: an exciting prototype and development platform, not a finished or certified seat.

Build carefully, test cautiously, keep clear of moving mechanisms, and where components are expected to carry significant loads, metal construction should be the goal.

General Information:

Pilot Spanner.jpg

Build Guide

Build Guide
create_a_footer_background_i_1.png

Patreon:        737DIYSIM

YouTube:      Heli Mech

Facebook:    Boeing738v2

Instagram:    737DIYSIM

Whatsapp:

Email:           HelenWaters@737DIYSIM.com

Postal Address:

737DIYSIM

UNIT 11B,

Trennisck Rural Park

Cubert,

Cornwall,

United Kingdom

TR8 5PN

  • Patreon
  • Discord
  • Instagram Social Icon
  • Facebook Social Icon
  • YouTube Social  Icon
Donate with PayPal

Fancy helping the website

or buying us a thank you beer?

bottom of page