Build Menu.png

Boeing 737 Single Yoke Control Head

This page is split into three main sections:

Parts Guide

Print Guide

Build Guide

These units can be produced on a standard 3D printer bed size of 220 x 220mm.

My 3D Printer of choice right now is the ENDER 3 v2

Great print & build quality for the price and Karl personally recommends it for his sim build.

pilot sign get here.png

General Information:

This Design is for a single 737 Yoke Control Head. The centring mechanism and force feel are provided within the control head itself by a 3" spring. The roll channel input is taken by a HQ 10KOhm Potentiometer. This is also fitted within the head unit.

This unit can be completely 3d printed (less hardware).

This is design is now printed and tested and already has had some great positive feedback.

 

Parts Guide:

Dark Grey PLA

QTY 1 Roll

Dome Head Machine Screws

M4 x 22mm (QTY 1)
M4 x 25mm (QTY 1)
M4 x 30mm (QTY 2)
M4 x 20mm (QTY 1)
M4 x 35mm (QTY 2)
M4 x 40mm (QTY 2)

RV24YN 20S
HQ POT 10K Ohm

QTY 1

Countersunk head Machine Screws

M4 x 10mm (QTY 1)

3" Expansion Spring

QTY 1

BEARING
(6203)

Inner Dimension: 17mm
Outer Dimension: 40mm
Width:
12mm
QTY 2

BEARING
(6001) 

Inner Dimension: 12mm 
Outer Dimension:
 28mm 
Width:
8mm 
QTY 1

You are going to need the following items to complete this build:

 
 

Print Guide

(1) RH BODY

Support: ON

Adhesion: Brim 10mm

Nozzle: 0.4mm 

Speed: 50mm/s

Layer Height: 0.1mm

Infill:25%

(5) YOKE SHAFT

Support: On

Adhesion: BRIM 10mm

Nozzle: 0.4mm

Speed: 50mm/s

Layer Height: 0.2mm

Infill:100%

(2) LH BODY

Support: ON

Adhesion: Brim 10mm

Nozzle: 0.4mm 

Speed: 50mm/s

Layer Height: 0.1mm

Infill:25%

(6) SPACER

Support: OFF

Adhesion: Brim 10mm

Nozzle: 0.4mm

Speed: 50mm/s

Layer Height: 0.1mm

Infill: 25%

(3) NOGGIN

Support: Off

Adhesion: Skirt

Nozzle: 0.4mm

Speed: 50mm/s

Layer Height: 0.2mm

Infill:25%

(7) SPUR GEAR

Support: Off

Adhesion: SKIRT

Nozzle: 0.4mm

Speed: 50mm/s

Layer Height: 0.1mm

Infill:25%

(4) YOKE LOCK

Support: Off

Adhesion: Skirt

Nozzle: 0.4mm

Speed: 50mm/s

Layer Height: 0.2mm

Infill:100%

(8) SPRING GEAR

Support: On (Touching Build plate)

Adhesion: BRIM 10mm

Nozzle: 0.4mm 

Speed: 50mm/s

Layer Height: 0.1mm

Infill:100% 

 

Build Guide

+673 7207616

Patreon:        737DIYSIM

YouTube:      Heli Mech

Facebook:    Boeing738v2

Instagram:    737DIYSIM

Twitter:         737DIYSIM

Watsapp:     +673 7207616

Email: HelenWatersClarke@Hotmail.com

Postal Address:

Karl & Helen Clarke

7 FLT AAC,

Medicina Lines

London

UK

BFPO 11

Fancy helping the website

or buying us a thank you beer?