top of page
Heli AH-64 Emergency Panel
This page is split into three main sections:
Parts Guide
Print Guide
Build Guide
The ultimate printer I can recommend is the Bambu Labs X1 carbon with AMS or P1P if you have deep pockets. ($1200). It's a massive leap forward in 3D printing, with excellent quality and impressive speeds. It's pretty much press print and go as the software and hardware do the calibration before each print.
General Information:
Build Guide
Click on image for more details
STEP:
1
Install the ON/OFF toggle switch into the Baseplate
Click on image for more details
STEP:
2
Place the Mid panel onto the Base Panel
Click on image for more details
STEP:
3
Install QTY 3, Korrys into the panel. Secure with hotglue on the backside.
Click on image for more details
STEP:
4
Install the Faceplate onto the assy.
Click on image for more details
STEP:
5
Install QTY 2, M4 x 14mm screw to secure the Assy
Click on image for more details
STEP:
6
Use QTY 2, M4 nuts onto the screws.
Build Guide
bottom of page