Heli AH-64 Pilots Lighting Panel
This page is split into three main sections:
Parts Guide
Print Guide
Build Guide
The ultimate printer I can recommend is the Bambu Labs X1 carbon with AMS or P1P if you have deep pockets. ($1200). It's a massive leap forward in 3D printing, with excellent quality and impressive speeds. It's pretty much press print and go as the software and hardware do the calibration before each print.
General Information:
Build Guide
Click on image for more details
STEP:
1
Install the QTY 5 10K ohm pots into their respective positions on the Base Plate. Then Install the QTY2 large ON/OFF/ON toggle switches in position and finally install the single push button.
Click on image for more details
STEP:
2
Please place the Mid Plate on top of the hardware, ensuring that it is resting against the Base Plate.
Click on image for more details
STEP:
3
Place the Faceplate over the Hardware so it rests on the Mid Plate.
Click on image for more details
STEP:
4
Install QTY 4, M4 x 14mm Black dome screws into tthe faceplate
Click on image for more details
STEP:
5
Secure the assembly, with QTY 4, M4 flange nuts.
Click on image for more details
STEP:
6
Place the respective knobs into thier correct position as shown.