top of page
Heli AH-64 Tail Wheel Panel
This page is split into three main sections:
Parts Guide
Print Guide
Build Guide
The ultimate printer I can recommend is the Bambu Labs X1 carbon with AMS or P1P if you have deep pockets. ($1200). It's a massive leap forward in 3D printing, with excellent quality and impressive speeds. It's pretty much press print and go as the software and hardware do the calibration before each print.
General Information:
Build Guide
Click on image for more details
STEP:
1
Install the On/Off toggle switch into the baseplate. Secure it with the supplied lock nut.
Click on image for more details
STEP:
2
Place the Mid plate onto the unit
Click on image for more details
STEP:
3
Insert the Korry into the orifice. Secure with hot glue.
Click on image for more details
STEP:
4
Place the faceplate onto the unit and secure it with QTY 2, M4 x 14mm screws.
Click on image for more details
STEP:
5
Use QTY 2 M4 nuts at the rear to secure the assembly.
Build Guide
bottom of page