top of page
Parts Guide:
Heli Apache AH64 Throttle Unit
You are going to need the following items to complete this build:
When you use the eBay links provided on the parts pages, it is possible that we at 737DIYSIM may receive a reward or compensation as part of the eBay partner affiliate program. If you do not wish for this to happen, you may use the product description to locate alternative parts from other vendors. Alternatively, you may enter the relevant details on eBay yourself without clicking on the provided link.
Click Image for Link | LINK | Component | Description | Qty |
|---|---|---|---|---|
12V TOGGLE SWITCH (large)
X1 ON/OFF/ON Latching
X2 ON/OFF Momentary | 3 PIN NOT THE 6 PIN VERSION | 3 | ||
3mm LED Green | 3mm FLAT TOP | 50 | ||
6X6x7MM LED TACTILE SWITCH | Green | 2 | ||
8 Position Rotary Switch | Spline Shaft | 1 | ||
BEARING 684 | Inner Dimension: 4mm
Outer Dimension:
9mm
Width:
4mm
| 2 | ||
Compression Spring | 0.4mm WD, 6mm OD and 15mm length | 2 | ||
Compression Spring | 0.6mm WD, 9mm OD and 25mm length | 2 | ||
Countersunk head Machine Screws | M4 x 14mm | 4 | ||
Dome Head Machine Screws | M3 x 16mm | 1 | ||
Dome Head Machine Screws | M4 x 14mm | 1 | ||
Dome Head Machine Screws | M3 x 8mm | 8 | ||
Dome Head Machine Screws | M4 x 18mm | 4 | ||
Dome Head Machine Screws | M3 x 5mm | 4 | ||
LOCKNUTS
| M4 | 4 | ||
LOCKNUTS
| M8 | 2 | ||
M4 Brass insert | 5mm OD Length 5mm | 10 | ||
M4 Flange nut | 8 | |||
Rotary Hall Angle Sensor | P3022-V1-CW360 Rotary Hall Angle Sensor (It must come with the mounting bracket) 0-5V | 2 | ||
THREADED BAR/ROD | M4x 55mm | 2 | ||
THREADED BAR/ROD | M4x 90mm | 2 | ||
THREADED BAR/ROD | M8 x 100mm | 1 | ||
THREADED BAR/ROD | M4x 60mm | 1 |
bottom of page