top of page
Parts Guide:
Heli Interface Unit (HIU)
You are going to need the following items to complete this build:
When you use the eBay links provided on the parts pages, it is possible that we at 737DIYSIM may receive a reward or compensation as part of the eBay partner affiliate program. If you do not wish for this to happen, you may use the product description to locate alternative parts from other vendors. Alternatively, you may enter the relevant details on eBay yourself without clicking on the provided link.
Click Image for Link | LINK | Component | Description | Qty |
|---|---|---|---|---|
60mm x 25mm Fan 24V | 60x25mm fan | 1 | ||
Arduino Mega 2560 Protoshield | super hand, It acts as a break out board and connector all in one. | 1 | ||
Arduino Mega 2560 R3 | The clones of the Arduino work great. You currently only need 1 of these for all Heli controls. You do not need this if you have already purchased this for the collective or cyclic. | 1 | ||
Countersunk head Machine Screws | M4 x 6mm | 4 | ||
Dome Head Machine Screws | M4 x 6mm | 8 | ||
Dome Head Machine Screws | M4 x 12mm | 16 | ||
Dome Head Machine Screws | M4 x 35mm | 4 | ||
LEOBODNAR BU0836A | You currently only need 1 of these for all Heli controls. You do not need this if you have already purchased this for the collective or cyclic.
| 1 | ||
Power Supply | 24v (At least 12A) | 1 | ||
TB6600 Driver | Only dip switch 2 is currently selected to ON | 4 |
bottom of page