Print in PLA or PETG. PLA-CF yields the best results, but is more expensive.
Colour: ANY
Nozzle:0.4mm
Layer Height: 0.28 (lower the better, but increased print times)
Support: OFF
Filament Usage: 5g
Print Time: 13m

Print in PLA or Stronger like Nylon
Colour: ANY
Nozzle:0.4mm
Layer Height: 0.28
Support: ON-Normal
Infill:100%
Wall Count: 4-6
Filament Usage: 38g
Print Time: 1H12m

Print in PLA or PETG. PLA-CF yields the best results, but is more expensive.
Colour: ANY
Nozzle:0.4mm
Layer Height: 0.28 (lower the better, but increased print times)
Support: OFF
Filament Usage: 7g
Print Time: 26m

Print in PLA or PETG. PLA-CF yields the best results, but is more expensive.
Colour: ANY
Nozzle:0.4mm
Layer Height: 0.28 (lower the better, but increased print times)
Support: ON-Normal
Infill:45% or greater
Wall Count: 4-6
Filament Usage: 112g
Print Time: 2H50m

Print in PLA or PETG. PLA-CF yields the best results, but is more expensive.
Colour: ANY
Nozzle:0.4mm
Layer Height: 0.28 (lower the better, but increased print times)
Support: ON-TREE
Infill:55% or greater (you want it as heavy as possible!)
Wall Count: 4-6
Filament Usage: 132g
Print Time: 5H02m

Print in PLA or PETG. PLA-CF yields the best results, but is more expensive.
Colour: ANY
Nozzle:0.4mm
Layer Height: 0.28 (lower the better, but increased print times)
Support: OFF
Filament Usage: 9g
Print Time: 21m