
_PNG.jpg)
RH BODY
(1)
QTY:1
Material: PLA
Colour: D.GREY
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm etc: 23 HRS
OR
Nozzle: 0.4mm, Layer height: 0.12mm ETC: 1 DAY 13 HOURS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
YOKE SHAFT
(5)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:100%
_PNG.png)
TQ SHAFT
(8)
Support: On (Touching Build plate)
Adhesion: BRIM 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:100%
_PNG.jpg)
LH BODY
(2)
QTY:1
Material: PLA
Colour: D.GREY
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm etc: 23 HRS
OR
Nozzle: 0.4mm, Layer height: 0.12mm ETC: 1 DAY 13 HOURS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
YOKE SHAFT
(5) ALT
THIS IS AN ALTERNATIVE ORIENTATION MAKING USE OF THE LAYER LINES FOR EXTRA STRENGTH
QTY:1
Material: PLA/ABS/PETG
Colour: Any
Infill:100%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
TQ SHAFT
(8) ALT
THIS IS AN ALTERNATIVE ORIENTATION MAKING USE OF THE LAYER LINES FOR EXTRA STRENGTH
QTY:1
Material: PLA/ABS/PETG
Colour: Any
Infill:100%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.jpg)
NOGGIN
(3)
QTY:3
Material: PLA
Colour: ANY
Infill:100%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm etc: 1 HRS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
BEVEL GEAR
(6)
QTY:3
Material: PLA
Colour: ANY
Infill:100%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm etc: 9 HRS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
YOKE LOCK
(4)
QTY:1
Material: PLA
Colour: D.GREY
Infill:100%
Support: ON - Touching Build Plate
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.2mm ETC:1 HOUR
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
SPACER
(7)
QTY:2
Material: PLA
Colour: D.GREY
Infill:100%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm etc: 1 HRS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active