top of page
Parts Guide:
737 MCP - 3d Printed Easy Build
You are going to need the following items to complete this build:
When you use the eBay links provided on the parts pages, it is possible that we at 737DIYSIM may receive a reward or compensation as part of the eBay partner affiliate program. If you do not wish for this to happen, you may use the product description to locate alternative parts from other vendors. Alternatively, you may enter the relevant details on eBay yourself without clicking on the provided link.
Click Image for Link | LINK | Component | Description | Qty |
|---|---|---|---|---|
Arduino Mega 2560 Protoshield | super hand, It acts as a break out board and connector all in one. | 2 | ||
Arduino Mega 2560 R3 | 2 fitted to the unit, 1 can be used depending on the wiring Scheme | 2 | ||
Countersunk head Machine Screws | M4 x 10mm (QTY50)
M4 x 20mm Qty4 | |||
Dome Head Machine Screws | M2.6 x 5mm QTY 6
M3 x 6mm = QTY 10
M3 x 8mm = QTY 10
| |||
EC11 Encoder | EC11 or similar
D shaft. 20mm | 6 | ||
Grub/Set Screws | M3 x 4mm | 8 | ||
KD2-22 Non-Latching, GREEN LED | D2-22 push-button switch Momentary ON-(ON) with LED
Black with Green Led (other colours optional) | 14 | ||
LED 5MM Green | GREEN | 3 | ||
Laser engraved front panel | This panel is optional! Many users have requested it. It was provided to enhance the unit's aesthetics. | 1 | ||
MAX7219 BLUE PCB | 8 digit display on a MAX7219 BLUE PCB, LED Colour optional | 5 | ||
MINI TOGGLE SWITCH | ON/OFF | 3 | ||
MINI TOGGLE SWITCH | ON/OFF/ON
MOMENTARY | 2 | ||
Mini Push Switch | Black top | 3 | ||
Resistor 100 OHM | 1/4 Watt 100 Ohm
You may need to go higher, if the led is too bright. | 3 | ||
Rotary Switch 1 x 12 | 1 x 12 Rotary Switch
Spline Drive | 1 |
bottom of page