top of page
Parts Guide:
Bell 212 Heli Cyclic
You are going to need the following items to complete this build:
When you use the eBay links provided on the parts pages, it is possible that we at 737DIYSIM may receive a reward or compensation as part of the eBay partner affiliate program. If you do not wish for this to happen, you may use the product description to locate alternative parts from other vendors. Alternatively, you may enter the relevant details on eBay yourself without clicking on the provided link.
Click Image for Link | LINK | Component | Description | Qty |
|---|---|---|---|---|
24V FAN | ANVISION 2-Pack DC 24V 40mm Dual Ball Bearing Brushless Cooling Fan, YDM4010B24 | 2 | ||
40mm PVC pipe | 40mm OD/26mm ID PVC pipe with a 2mm wall thickness and a suggested 260mm in length. The height is optional; adjust to your needs. | 1 | ||
6203 Bearing | This 6203 SKF bearing is a Open Type of Deep Groove Radial Ball Bearing with a standard radial internal clearance. The bearing's dimensions are 17mm ID x 40mm OD x12mm Deep. | 6 | ||
Arduino Mega 2560 R3 | QTY 1 | 1 | ||
BEARING
(608) | Inner Dimension: 8mm
Outer Dimension: 22mm
Width:
7mm | 7 | ||
Countersunk Screws | M3 x 6mm | 8 | ||
Countersunk Screws | M4 x 25mm | 2 | ||
Countersunk head Machine Screws | M4 x 12mm
| 10 | ||
Dome Head Machine Screws | M4 x 25 mm | 6 | ||
Dome Head Machine Screws | M4 x 20mm | 5 | ||
Dome Head Machine Screws | M3 x 15mm | 8 | ||
Dome Head Machine Screws | M4 x 8mm | 4 | ||
Dome Head Machine Screws | M4 x 22 mm | 2 | ||
Expansion Springs | 40mm springs, 10mm OD, 1.2mm wire thickness
The exact spring size is optional, use thicker wire size springs for a stronger feel, thinner diameter wire for a weaker feel. These springs set the operating force of the cyclic | 4 | ||
Grub Screws | M4 x 5mm | 2 | ||
LEOBODNAR BU0836A |
| 1 | ||
LOCKNUTS
| M8 | 6 | ||
M4 Nuts | M4 Nuts | 6 | ||
M6 Bolts | 30mm Length | 1 | ||
M8 Bolts | 45mm Length | 1 | ||
M8 Bolts | 60mm Length | 1 | ||
M8 Bolts | 30mm Length | 4 | ||
M8 Bolts | 22mm Length | 4 | ||
M8 THREADED BAR/ROD | 125mm Approx in length | 1 | ||
Nema 17 Stepper 17HS19-2004S1 | Motor size: 42*42*40mm (Approx.)
*Phase: 2
*Step angle: 1.8 °± 5% | 2 | ||
RV24YN 20S
HQ POT 10K Ohm | QTY 2 | 2 | ||
Rotary Hall Angle Sensor | P3022-V1-CW360 Rotary Hall Angle Sensor (It must come with the mounting bracket) 0-5V
This part is optional if you do not wish to use the pots | 2 | ||
Washer | M8 | 8 | ||
Washer | M4 | 4 |
bottom of page