top of page
Parts Guide:
Boeing 737 Dual Control Column Pitch Lane
You are going to need the following items to complete this build:
When you use the eBay links provided on the parts pages, it is possible that we at 737DIYSIM may receive a reward or compensation as part of the eBay partner affiliate program. If you do not wish for this to happen, you may use the product description to locate alternative parts from other vendors. Alternatively, you may enter the relevant details on eBay yourself without clicking on the provided link.
Click Image for Link | LINK | Component | Description | Qty |
|---|---|---|---|---|
1" Flat Bar - Mild Steel | QTY 1 x 218mm
QTY 3 x 130mm | |||
1" Right Angle Mild Steel | QTY 1 x 183mm
| |||
2mm S.Steel or Brass Rod | 2mm Rod x 135mm Length - Qty1 | |||
4" Spring | Strong Powerful Springs Required. QTY 2
100mm x 12.4mm x 2.2mm | |||
40mm U Bolt | QTY 1 | |||
6 X Servo Push Rod Linkage Stoppers | QTY 2 | |||
608 Bearing | Ball Bearing
Inner Dimension: 8mm
Outer Dimension: 22mm
Width: 7mm
Qty 8 | |||
6202 Bearing | Inner Dimension: 15mm
Outer Dimension: 35mm
Width: 11mm
Qty 4 | |||
BEARING
(6001) | Inner Dimension: 12mm
Outer Dimension: 28mm
Width: 8mm
| 6 | ||
Bolts | M6 x 25mm (QTY 1)
M6 x 30mm (QTY 1)
M6 x 35mm (QTY 4)
M6 x 45mm (QTY 1)
M6 x 60mm (QTY 1)
M6 washer (QTY 5)
M6 lock nut (QTY 7)
M8 x 20mm (QTY 2)
M8 x 35mm (QTY 8)
M8 lock nut (QTY 12)
M8 washer (QTY 10)
M8 penny washer (QTY 4)
M12 lock nut (QTY 9)
M12 washer (QTY 9) | |||
Dome Head Machine Screws | M3 6mm dome head (QTY 2)
M4 60mm (QTY 4) | |||
KP Series Pillow Block Mounted Housing Bearing 8mm | QTY 2 | |||
Linear Actuator | 12v, 50mm stroke, Qty 1 | |||
Piano Wire, Servo Push Rod | QTY 1 | |||
Rotary Hall Angle Sensor | P3022-V1-CW360 Rotary Hall Angle Sensor (It must come with the mounting bracket) 0-5V | |||
THREADED BAR/ROD | 8mm Dia-110mm length (QTY 3)
12mm Dia - 200mm length (QTY 1)
12mm Dia - 105mm (QTY 1)
12mm Dia - 145mm (QTY 1) | |||
Tie rod (adjustable) | 210mm length, 6mm eye ends, QTY 1 |
bottom of page