top of page
Parts Guide:
Boeing 737 Throttle Quadrant v3
You are going to need the following items to complete this build:
When you use the eBay links provided on the parts pages, it is possible that we at 737DIYSIM may receive a reward or compensation as part of the eBay partner affiliate program. If you do not wish for this to happen, you may use the product description to locate alternative parts from other vendors. Alternatively, you may enter the relevant details on eBay yourself without clicking on the provided link.
Click Image for Link | LINK | Component | Description | Qty |
|---|---|---|---|---|
10 KOHM
POTENTIOMETER | QTY: 2 | |||
12V TOGGLE SWITCH
ON/OFF/ON MOMENTARY | 3 PIN NOT THE 6 PIN VERSION QTY 2 | |||
16MM 6V PANEL LIGHT | RED IS PREFFERD
6 VOLT
16MM DIAMETER QTY 1
If you buy the 240V version in the link, you must remove the Resistor and solder in a new one that matches the LED voltage and source voltage. | |||
16MM PUSH SWITCH
| BLACK IS PREFERRED QTY 1 | |||
24 AWG HOOK UP WIRE | WHITE PVC COATING (1 ROLL) | |||
6MM LOCKING NUTS | QTY 8 | 8 | ||
ALUMINIUM BAR | 3MM X 15MM X 116MM QTY 2 | |||
ARDUINO MICRO PRO / ARDUINO LEONARDO | OPTIONAL OR USE LEOBODNAR | |||
Allen Head
Machine Screws | M3 X 8MM QTY 6
M4 X 14MM QTY 2
| |||
CounterSunk Machine Screws | M3 X 8MM QTY 40
M3 X 12M QTY 6
M4 X 10MM QTY2
M4 X 20MM QTY 5
M4 X 8MM QTY 16
M5 X 16MM QTY 4
| |||
Dome Head Machine Screws | M3 X 8MM QTY 3
M3 X 10MM QTY 2
M3 X 12MM QTY 11
M3 X 15MM QTY 4
M3 X 18MM QTY 2
M3 X 25MM QTY 4
M4 X 10MM QTY 20
M4 X 25MM QTY 5
| |||
LEOBODNAR BU0836A | OPTIONAL OR USE ARDUINO ALTERNATIVE
| |||
Mini Push Switch | QTY: 4 | |||
ROTARY SWITCH | THESE ARE FOR THE BALL BEARINGS AND SPRINGS INSIDE THE UNIT QTY 2 | |||
RV24YN 20S
HQ POT 10K Ohm | SLIGHTLY MORE EXPENSIVE
BUT SEEM MORE RELIABLE AND LESS ELECTRICAL JITTER QTY 4 | |||
SPRINGS | 4mm X 78mm QTY 2
6mm X 30mm QTY 2 | |||
THREADED BAR/ROD | M6 X 196mm QTY 1
M6 X 170mm QTY 3 | |||
V-156-1C25
MICROSWITCH | ROLLER ACTUATED QTY 4 |
bottom of page