top of page

Print Guide:

Boeing 737 Saitek Throttle MOD

3d prining.png
RH Yoke Head Body (1).PNG

(1) THRUST KNOBS

Printed on end
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(5) FLPAS DECAL

Printed on end
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(9) FLAPS LVR UPPER

Printed on end, Support Structure on.
25% infill
0.1mm Layer Height
0.4mm

RH Yoke Head Body (1).PNG

(13) SPD BRK HANDLE

Printed text up.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(17) BRK LVR MODDED

Printed on side.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(21) CUT OFF BODY

Printed on end
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(25) LH END CAP

Printed flat, Countersunk side up.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(29) SWITCH CAP

Printed with base flat.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(33) SPRING PLUG

Printed with base flat.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(2) REV KNOBS

Printed on end
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(6) END PLATE

Printed Flat
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(10) FLAPS LVR LOWER

Printed Flat, round side down. Supports on.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(14) FLAPS HANDLE

Printed Flat, text up.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(18) BRK LVR ASSY

Printed flat, supports on.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(22) CUT OFF LEVER

Printed flat, stud up.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(26) ADAPTER PLATE

Printed Flat, rim side up. Supports on.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(30 ) CUTOFF DECAL

Printed Flat, text up.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(3) BACKPLATE

Printed on flat, countersink holes up
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(7) FLAP ASSY BODY

Printed flat, support structure as req’d.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(11) REV LVRS

Printed flat, Supports On.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(15) SPD BRK HANDLE

Printed flat, support structure as req’d.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(19) BRK LVR CAP

Printed on flat, countersink holes up
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(23) CUTOFF HANDLE

Printed Flat, text up
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(27) WEDGE

Printed on end, Supports On.
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(31) STAB TRIM DECAL

Printed flat, text up.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(4) BRACKET

Printed flat
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(8) FLAP DETENT

Printed flat, noggins face up. Support structure on.
25% infill, 0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(12) SPACER BODIES

Printed flat, Support structure on.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(16) TOP PLATE

Printed flat.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(20) CENTRE BODY

Printed on side
25% infill
0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(24) LH BODY

Printed flat, Support structure on.
25% infill, 0.1mm Layer Height
0.4mm Nozzle

RH Yoke Head Body (1).PNG

(28) RH BODY

Printed flat, Support structure on.
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

RH Yoke Head Body (1).PNG

(32) PARK BRAKE DECAL

Printed flat, text up
25% infill
0.1mm Layer Height
0.4mm Nozzle (0.2mm Recommended)

bottom of page