
Boeing 737 MTU Base
This page is split into three main sections:
Parts Guide
Print Guide
Build Guide
The ultimate printer I can recommend is the Bamboo Labs X1 carbon with AMS if you have deep pockets. ($1200). It's a massive leap forward in 3D printing, with excellent quality and impressive speeds. Its pretty much press print and go as the software and hardware do the calibration before each print. This printer will not manage the larger parts and you are going to need the CREALITY CR10 v3, which is my second choice of printer.

This is the design most people want. Fully 3d printed with motorised Trim Wheels, Throttle levers, speed brake, parking brake and Trim indicators.
This design requires a print size of 300mm x 300mm
General Information:
Parts Guide:

You are going to need the following items to complete this build:
Click Image for Link | Component | Description | Qty |
---|

Print Guide
_PNG.png)
1 Base
QTY:1
Material: PLA
Colour: Dark Grey
Infill:15%
Support: ON - Everywhere
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.32mm, ETC: 4 days
Nozzle:0.8mm, Layer height: 0.64mm, ETC 22 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
6 Clamp Large
QTY:1
Material: PLA
Colour: Dark Grey
Infill:20%
Support: ON - Everywhere
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:2 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 6 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
2 & 3 Side Panels
QTY:1
Material: PLA
Colour: Dark Grey
Infill:15%
Support: ON - Everywhere
Adhesion: None
Nozzle: 0.4mm, Layer height: 0.32mm, ETC: 2 days
Nozzle:0.8mm, Layer height: 0.64mm, ETC 10hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
7 BOB holder
QTY:1
Material: PLA
Colour: Any
Infill:20%
Support: ON - Everywhere
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:4 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 2 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
4 Arduino & Leobodnar Mount
QTY:1
Material: PLA
Colour: Dark Grey
Infill:15%
Support: ON - Everywhere
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:10 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 3 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
5 Small Clamp
QTY:1
Material: PLA
Colour: Dark Grey
Infill:20%
Support: ON - Everywhere
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:4 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 1 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Build Guide



