Bell 212 Heli Cyclic

Print Guide:

Bell 212 Heli Cyclic

A1 Aft Frame

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 9 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C5 Button Guard

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 0.16 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

F2 Stepper Load Mount

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

G3 FWD Tong

QTY:2
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

G1 Force Feel Base

QTY:2
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 5 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J9 Loading Cap

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1.0 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J6 Spur Gear

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 0.22 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J7 Fan Shroud

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 13 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

A2 Pot Gear

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt/Raft
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C2 Sweep Back

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 16 Hours

***DO NOT Print this vertically! It will break along the layer layers due to the high forces. It needs the horizontal print direction for strength, despite the rougher finish. This part will require post-print surface finishing***

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C6 Top Hat

QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON
Adhesion: Skirt/Raft
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

F3 Stepper Mount

QTY:1
Material: ABS
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
ETC: 1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

U3A Cup

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
ETC: 0.20 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J8 Stepper Plate

QTY:1
Material: ABS
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1.0 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Z1 Drill guide

QTY:1
Material: PLA
Colour: Any
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
ETC: 2 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

S1 8T Spur Gear

QTY:1
Material: ABS
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 0.15 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J5 Shaft Adapter

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1.5 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

B1 Base

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 12 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C3 LHS 212 Grip

QTY:1
Material: PLA
Colour:Silk Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm (0.12 Recommended, but will take even longer!)
ETC: 11 Hours

***If you can resin print this part, it will turn out beautifully***

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C7 Bearing Cap

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
ETC: 0.1 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

F4 Fan Shroud

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 3 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

U1 Unilever Base

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 5 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J2 Fwd Lat Cap

QTY:2
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 0.19 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J3 Unijoint body

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 21 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

U3B Cup

Z2 Lower Drill guide

QTY:1
Material: PLA
Colour: Any
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
ETC: 3 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

B2 Boot

QTY:1
Material: TPU
Colour: Grey or Black
Infill:5%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.2mm
ETC: 18 Hours

*** HIGHLY RECOMMEND YOU USE THE SETTINGS PRINTED ON YOUR ROLL OF TPU***

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 30mm/s
Infill Speed: 30mm/s
Support Speed: 30mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

C4 RHS 212 Grip

QTY:1
Material: PLA
Colour: Silk Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm (0.12 Recommended, but will take even longer!)
ETC: 11 Hours

***If you can resin print this part, it will turn out beautifully***

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

F1 FWD Support

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Everywhere
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 9 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

U2 Bearing Block

J1 Aft LAT CAP

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 0.19 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

G2 AFT Tong

G4 FF Backing Plate

QTY:2
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 2 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

J4 Spacer

QTY:1
Material: PLA
Colour: Grey or Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 0.09 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Print Guide: