
_PNG.png)
Throttle Knobs
(1 & 2)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
Spring Plugs
(9 & 10)
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Speed Brake Arm Upper (16)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25% (100% for a strong finish)
_PNG.png)
Flap LVR Handle (20)
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm recommended)
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Flaps Decal Plate (24)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
Parking Brake Decal (28)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
BRK LVR BODY CAP (32)
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Cut Off Body LH (36)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
RH Cutoff Body
(42)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
SPD BRK Bracket (46)
Support: Off
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
#1 & #2 Base Cover Plate (50 & 54)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Reverser Knobs
(3 & 4)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
Spacer Bodies
(11 & 12)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Speed Brake Stem (17)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Flap Lever Upper (21)
Support: On (everywhere)
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25% (100% for a strong finish)
_PNG.png)
Speed Brk Decal (25)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
Parking Brake Lever (29)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:100%
_PNG.png)
BRK LVR Main Body (33)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Cutoff LVR HDL 1&2 (37 & 38)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
Throttle Knobs
RH End Cap (43)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
#1 Base Bracket (47)
Support: Off
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
#2 Base Bracket (51)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Reverser Arms
(5 & 6)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Back Plate
(13 & 14)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Speed Brake Stem Upper (18)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Flap Lever Stem (22)
Support: On (Everywhere)
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Stab Trim Decal (26)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
LH End Cap
(30)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
LH Base Body (34)
(EPIC PRINT!)
Support: On (everywhere)
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Cutoff LVR 1 & 2
(39 & 40)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
RH BODY (44)
EPIC PRINT!
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
#1 & #2 Brake
(48 & 52 )
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Flaps Bracket
(55)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Top Plates
(7 & 8)
Support: Off
Adhesion: Brim 10mm
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Speed Brake Handle (15)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
Speed Brake Stop (19)
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Flap Detents
(23)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Cutoff Decal
(27)
Support: On
Adhesion: Skirt
Nozzle: 0.4mm (0.2mm Recommended)
Speed: 50mm/s
Layer Height: 0.1mm
Infill:25%
_PNG.png)
BRK LVR Cap
(31)
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
BRK LVR Case Body (35)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Cuffoff LVR Centre Body (41)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
SPD BRK Brake
(45)
Support: Off
Adhesion: Skirt
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
#1 & #2 Stem
(49 & 53)
Support: On
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%
_PNG.png)
Throttle Base Body (56) EPIC PRINT!
Support: On (Everywhere)
Adhesion: Brim 10mm
Nozzle: 0.4mm
Speed: 50mm/s
Layer Height: 0.2mm
Infill:25%