Design available to download on Cults3d -Click Here
What This Version Is:
This is the budget‑friendly edition of the 737SS AFDS (Autopilot Flight Director System). It includes 3D‑print files only, with no editable CAD, keeping cost low while still delivering a visually accurate AFDS module for your simulator. Perfect for builders who simply want to print, assemble, and install—without requiring the large, heavy CAD assemblies seen in the full version.
Key Features Fully 3D‑Printable Assembly This package provides all structural and cosmetic parts as optimized 3MF / STL files.
Based on the New Real‑AFDS Referenced Design This simplified version is derived from your updated AFDS design—originally created from a real AFDS faceplate that was mailed to you for measurement accuracy. Even in this cheaper edition, the printed parts preserve:
Accurate proportions and button spacing The stacked light‑diffusion layout (faceplate, lenses, diffusers) Your improved tactile switch placement design A realistic exterior appearance despite being 3D‑print‑only
(This version does not include laser‑engraved plates or CAD sources.)Tactile‑Button Ready The front buttons are designed to accept small LED tact switches (4 per button in the full version). You may substitute cheap single tactile or simple push buttons depending on your budget and requirements.
What’s Included ✔ 3D‑print files only (3MF or STL depending on part) ✔ All structural AFDS parts including:
AFDS faceplate Switch caps Diffuser & lens components as printable options Backing structure / mounting frame
✘ No CAD files (STEP/Fusion) ✘ No PCB or laser‑engraved plates — physical upgrade components can be purchased: https://www.737diysim.com/product-page/737ss-afds-laser-etched-panel-upgrade
Context of Use This file is intended for home flight simulation, specifically for builders working with the 737SS cockpit architecture.
Use this cheaper version if you:
Don’t need CAD Don’t need extreme dimensional editing Only want to print and assemble Want a cost‑effective alternative that still looks the part
Limitations
Not for real aviation use No CAD included No PCB included Simplified tolerances vs. the premium CAD edition Light behaviour less precise compared to the laser‑engraved upgrade version Optional electronics required for illumination and button feedback
YouTube Build Video 👉 https://youtu.be/2nWHWX9HUcc
3D printing settings
Printing Recommendations
Material: PLA or PETG Clear parts: Use transparent PLA/PETG or resin for the lens/diffuser pieces Settings:
0.12–0.2 mm layer height Slow print for the faceplate for sharper legend recesses
Supports: Minimal; depends on printer orientation Finishing:
Sand the faceplate lightly Paint edges matte black for better light control
