Take the complexity out of building the electrical section of your 737 Forward Overhead Panel.
This new 737 Forward Overhead Electrical Panel PCB has been designed specifically for the 2026 version of the 737DIYSIM Forward Overhead Panel, providing a clean, simple and builder-friendly way of adding the electrical 7-segment displays to your cockpit.
Designed to Keep Things Simple
Anyone who has wired individual 7-segment displays and MAX7219 driver chips knows how quickly the wiring can get complicated.
We've done that hard work on the PCB.
The board includes the required display-driving electronics and is designed around our experience building these panels over the years. Wherever practical, we've opted for SMD components already fitted to the PCB, keeping through-hole soldering to an absolute minimum.
For the builder, there are just 5 connection pins, making installation and connection to your simulator electronics extremely straightforward.
Features
Designed specifically for the 2026 737DIYSIM Forward Overhead Electrical Panel
5V operation
Dedicated for Arduino / BOB-based installations
Only 5 connection pins
Integrated display-driving electronics
SMD construction to minimise builder soldering
Designed to remove the complexity of MAX7219 and individual 7-segment wiring
Direct fit into the 2026 overhead panel design
User-replaceable / selectable 7-segment displays
Supports 0.36" Common Cathode 7-segment displays
Optional Green 7-Segment Displays
Please note: the 7-segment displays are NOT soldered to the PCB and are an optional extra.
We deliberately supply the PCB this way so builders aren't locked into our choice of display colour.
If required, we can supply suitable green 0.36" Common Cathode 7-segment displays with the PCB. Alternatively, you can source your own compatible displays in the colour that best suits your cockpit.
This also means the only components the builder needs to solder are the 7-segment displays themselves.
Why SMD?
We chose an SMD-based design for a practical reason.
From years of producing and supporting DIY simulator electronics, we've found that reducing through-hole soldering considerably simplifies the build and reduces the chance of accidental solder bridges, incorrect component placement, and wiring mistakes.
The complicated part is already done. You simply fit your chosen displays, install the PCB into the panel and make the required connections.
Less soldering. Less wiring. Fewer opportunities for mistakes. More time actually building and flying your simulator.
Please Check Your Displays
If you're supplying your own displays, make sure they are:
0.36" high • Common Cathode • electrically compatible with 5V operation and the PCB
Common Anode displays are not a direct substitute for the specified Common Cathode displays.
































